There have been many attempts over the years to repair the cracks and not expensive alternative to the removal of concrete and repouring. Despite all efforts to repair concrete cracks drugs not always work due to lack of product options.
The Next Generation of Repair Products
the evolution of concrete products is learned from the coating. For example, acrylic sealers are the cheapest coating, and the years to protect concrete surfaces. They led to the use of epoxies and urethanes that are standard industrial coatings for decades. Variations are produced. However, these products are simple chemical combinations with little variance.
In recent years, Polyurea and polyaspartics have been developed that are complex chemicals that combined to produce unique results. Polyureas have the unique ability to "wet" the concrete. What it means when applied to the porous surface of the cement they actually absorbed into the pores as the water soaks into the sponge, and not stick to the surface like a piece of tape as is the case with epoxy. When a cure polyureas they become part of the concrete.
Well polyureas are now at the top of the pyramid of coatings and repair products of evolution.
and features Polyaspartics Polyureas
As mentioned polyureas will absorb into the porous cement surfaces. Polyaspartics added polyureas which will increase or decrease the cure time, depending on the situation. It is very unique in the hands of experienced aplikator.Kombinacija can be adjusted depending on the temperature and climate. In hot weather climates such as Florida cure time can be slowed down while in Minnesota during the cure can be increased. This has opened up new markets and opportunities for coating applicators. For example, garage floor can be resurfaced in the day the result will take 3-4 days for a result superior to the epoxy.
for commercial and industrial flooring is the result of duboka.Brzo curing capabilities allow the applicator to apply high performance coatings business without having to shut down. This saves money and creates new job opportunities for the applicator.
Polyureas as concrete crack repair products
Concrete is one of the most used commodities on the planet and always cracks. Until recently, crack fillers lacked several critical components preventing them from performing. First, they are usually too thick to flow to the bottom of the cracks. The cracks are rarely ravno.Četiri inches thick cracked plate can have a part time dog leg down. If the crack filler is too thick to fit on the first corner. The problem is that cracks are like holes for moisture vapor. If the crack is not filled at the bottom of moisture vapor will travel to the crack and work real hard to push out of the way of weakness.
Another major problem is the crack filler to treat the surface and often wet surfaces. Moisture vapor that travels up through the porous walls of the fissure cracks moist. Crack fillers do not have a chance. They tend to stay wet, not a cure. For years it was always thought to what you can not see can hurt you.
Imagine all the millions of dollars worth of crack filler in the world that does not work. Polyureas resolve this problem. Keep in mind that all of the polyureas are not the same. But they can be thin enough to pour into the cracks and flow down to the bottom. As mentioned earlier have the ability to wet the concrete and when he fills in the cracks in the walls are absorbed and become part of the plate.
Incredible, but true to have the ability to cure under the surface, and are activated by moisture. In the end you can bend with the movements on the ground. Not only are excellent crack repair product, but polyureas can be used to repair failures in the area. In fact polyureas are used to repair floors that look like they are without hope.
0 comments:
Post a Comment